Single Board Computer OK1043A-C3 based on NXP LS1043A
Forlinx OK1043A-C3 single board computer/development board is designed based on NXP Cortex-A53 featuring quad-core processor LS1043A with frequency up to 1.6GHz. It consists of carrier board and SoM (system on module) with separated structure by COM Expressor connector with transfer rate up to 10GHz. the processor can support 7 native Gigabit Ethernet and 1 XFI(10GbE). PCIe2.0, SATA3.0, USB3.0, UART, IIC peripheral interfaces are available, in software view, Ubuntu and OpenWRT are both well supported. Widely used in industrial router, edge computing gateway, IP-PBX, energy management, automation, and other fields.
Powerful Native Ethernet Interface
7x Ethernet with one up to 10Gbps and six up to 1000Mbps
High-speed Network
Data Path Acceleration Architecture(DPAA) incorporating acceleration for Packet parsing, classification,
and distribution(FMan), queue management for scheduling, packet sequencing,
and congestion management(QMan), and hardware buffer management for buffer allocation
and de-allocation(BMan). Software supported with DPDK and OVS-DPDK for high
performance in network related data packet processing
Various High-speed Interfaces
5Gbps PCIe2.0, 5Gbps USB3.0, 6Gbps SATA3.0, 10Gbps Ethernet
Flexible scalability
PCIe2.0(up to 5Gbps) scalable for Ethernet, dual-band WiFi and other high-speed peripherals
COM Express Package Designing
OK1043A-C3 SBC Pin Diagram
OK1043A-C3 single board computer consists of SoM FET1043A-C and carrier board
▊ Hardware Features
Overview of FET1043A-C System on Module | |
---|---|
CPU | NXP LS1043A |
Architecture | QuaCortex-A53 |
Frequency | ≤1.6GHz |
RAM | 2GB DDR4 |
ROM | 8GB eMMC; 16MB QSPI NorFlash |
OS | Ubuntu/OpenWrt |
Voltage Input | 12V |
Package | COM Express |
Working Temp | -40℃~ +80℃ |
Dimensions | 84mm×55mm |
FET1043A-C System on Module Features | ||
---|---|---|
Peripheral |
QTY |
Spec. |
Ethernet |
≤7 |
CPU has 7 native MAC, available for below combinations 7x 1Gbps Ethernet1x 2.5G/10Gbps and 6x 1Gbps Ethernet 2x 2.5Gbps and 2x 1Gbps Ethernet |
PCIe2.0 |
≤3 |
SerDes configurable, can support X1, X2, X4 modes, each channel up to 5GT/s |
SATA3.0 |
≤1 |
SerDes configurable, up to 6Gbps |
SerDes2 |
4 |
4x SerDes for high speed peripherals: 3x PCI Express 2.0 controller 1x SATA 3.0 controller up to 4x SGMII with 1000 Mbit/s up to 2x SGMII with 2500 Mbit/s up to one XFI (10 GbE) up to 1x QSGMII |
USB3.0 |
≤3 |
up to 5Gbps |
UART |
≤6 |
2x DUART or 6x UART |
IIC |
≤3 |
|
eSDHC |
≤1 |
can support SD3.0 EMMC4.5, multiplexed with eMMC, it can be used for system booting or flashing, but can not be used for storage expanding |
JTAG |
1 |
NXP CodeWarrior TAP |
Note 2: SerDes configurations about Ethernet, PCIe and SATA, please refer to QorIQ LS1046A Reference
OK1043A-C3 Carrier Board Features | ||
---|---|---|
Peripheral |
QTY |
Spec. |
Ethernet 1Gbps |
6 |
1G/ 100M/ 10Mbps auto-negotiation, 4 from QSGMII, 2 from RGMII |
SFP+ |
1 |
up to 10Gbps, available for SFP+ and electrical module |
M.2 M key |
1 |
contains one PCIe2.0, could mount SSD |
M.2 B key |
1 |
contains one PCIe2.0, for WiFi |
USB 3.0 |
2 |
up to 5Gbps |
4G |
1 |
Mini PCIe is preserved with USB and SIM card signals for 4G wireless module |
UART |
3 |
TTL, 3-wire |
Debug |
1 |
RS232 |
4G | 1 | Mini PCIe connector, preserved with USB signal and SIM card slot, which could be only used for 4G wireless |
Micro SD Card |
1 |
multiplexed with eMMC, guide to uboot installation, could not be used for storage expanding |
RTC |
1 |
on-board CR2032 |
User key |
1 |
for user's definition |
▊ Software Features
Linux Ubuntu | ||
---|---|---|
Cross-compiler |
aarch64-linux-gnu-gcc |
Ubuntu/Linaro 7.3.0-16ubuntu3~18.04, glibc-2.27, binutils-2.30-0, gdb-8.1 |
System Flashing |
SD card |
|
U-disk |
|
|
UBoot |
version: Uboot-2018.03 |
|
can support device tree |
|
|
can support TFTP NFS |
|
|
can support U-disk, eMMC, TF card, QSPI Flash, etc. |
|
|
Linux kernel MAC setting and saving |
|
|
Linux Kernel |
Version: Linux-4.14.47 |
|
File system |
EXT4/NFS/FAT32 |
|
eMMC |
HS200 mode |
|
Watchdog |
|
|
RTC |
Rx8010 |
|
IO |
|
|
QSPI |
4-wire mode high speed reading and writing |
|
PCIe |
can support WLE900VX 5G WIFI module with mini PCIe interface
can support RTL8111F Gigabit Ethernet module with MINI-PCIe interface |
|
USB 3.0 |
U-disk, USB Hub, USB keyboard and mouse, etc. |
|
TMU |
LS1043 internal temp sensor |
|
UART |
|
|
Ethernet, (10000/1000/100/10Mbps) |
1x 10-Gigabit Ethernet, 6x Gigabit Ethernet |
|
UART |
1x RS232 debug port, 3x RS232 general purpose UART |
|
Ubuntu File System |
Version: Ubuntu-18.04.1 |
|
Samba |
|
|
Lighttpd |
|
|
Docker |
|
|
LXC |
|
|
QEMU |
|
|
OP-TEE OS |
|
|
OpenSSL |
|
|
IPSEC |
|
|
DPDK |
OVS-DPDK |
Linux LEDEv17.01.6 Release | ||
---|---|---|
Linux Kernel |
Version: Linux- 4.9.63 |
|
OpenWRT |
Version: v17.01.6 |
|
Source Pack and Version |
ath10k-firmware-qca988x_2017-03-29-956e2609-1_aarch64_generic |
▊ NXP Software Resource Recommendation ASK
ASK is an OpenWRT-based application solution kit for broadband routers from NXP, which utilizes the packet gas pedal in the LS1043A / LS1046A processor and delivers wire-speed performance with less than 5% ARM core load.
LS1043A ASK Download: NXP Special Single Chip Hardware Speeds Router/Switch Software
▊ Download
Catalog: Forlinx Catalog Manual
Product Brief: FET1043A-C3 SoM and OK1043A-C3 SBC introduction
▊ Accessories
Please click here to get more information about the supported modules and accessories.
▊ Technical Support
1. Files to be provided after buying
Hardware related: datasheet, user guide, carrier board schematic, carrier board PCB, SoM pinmux;
Firmware related: OS image, testing demo, source code, manual;
Compiling environment
2. Fast response after-sale technical support service
Contact Us
Welcome to get in touch with us, our experts will reply to your email within 24 hours.
▊ How To Buy
1. Order Online
We have an online store on Alibaba, please contact us for details.
2. Order Offline
Please send your inquiry to [email protected];
3. Payment Terms
100% T/T in advance.
▊ Shipment
1. Delivery: Goods will be shipped by express upon the receipt of the payment;
2. Lead time: Goods will be shipped out within five working days for sample orders and 6 weeks for bulk orders;
3. Shipping charge: Buyers should bear the shipping cost.
▊ Other Forlinx LS10xx Series Products
Architecture: Cortex-A53
Frequency: 1.6GHZ
RAM: 2GB DDR4
ROM: 16MB QSPI NorFlash,8GB eMMC
System: Ubuntu-18.04.1,OpenWrt v18.06.0-rc2
Architecture: Cortex-A72
Frequency: 1.8GHz
RAM: 2GB/4GB LPDDR4
ROM: 8GB eMMC
System: Ubuntu-18.04.1,OpenWrt v18.06.0-rc2
Architecture: Cortex-A72
Frequency: 1.5GHz
RAM: 2GB DDR4
ROM: 8GB eMMC
System: Ubuntu18.04
Architecture: Cortex-A53
Frequency: 1.0GHz
RAM: 512MB DDR3L
ROM: 16MB QSPI NorFlash,8GB eMMC
System: Ubuntu-18.04.1,OpenWrt v18.06.0-rc2