OK-MX95xx-C Single Board Computer

CPU: NXP i.MX95xx

Architecture: 6x [email protected] + 1x Cortex-M7@800MHz + 1xCortex-M33@333MHz

Frequency: 333MHz ,800MHz,1.8GHz

RAM: 8GB LPDDR4x

ROM: 64GB eMMC

System: Linux

Brief Message Compare

OK-MX95xx-C Single Board Computer Based on NXP i.MX95xx Processor

OK-MX95xx-C single board computer(SBC) features a SoM + Carrier Board split design with 320 pins. It uses four 80-pin board-to-board connectors to lead out the processor's functional pins in the most convenient way, optimizing for different functions, which simplifies user design and provides a solid basis for project evaluation and design.


OK-MX95xx-C SBC

NXP i.MX95 single board computer(SBC)

NXP New Flagship Chip

NXP i.MX95xx combines high performance application cores, independent MCU real-time domain, Energy Flex architecture,
advanced security supported by EdgeLock® secure zone, and dedicated multi-sensor data processing engines (graphics, image, display, audio, and voice),
to accelerate edge machine learning applications.

NXP i.MX95 system on module/single board computer NXP New Flagship Chip

High-performance GPU

New-generation ARM Mali-G310 enhances support for high dynamic range and provides AFBC uncompressed buffer, selected ARM fixed-rate compression (AFRC),
and Foveation Rendering technology to enhance augmented/virtual reality effects, with support for OpenGL® ES 3.2, Vulkan® 1.2, OpenCL™ 3.0.

NXP iMX95 system on module/single board computer High-performance GPU

High Computing Power to Empower Edge Applications

The i.MX95xx chip integrates a built-in Neural Processing Unit (NPU) with a high computing power of up to 2 TOPS,
which enables excellent machine learning and deep learning capabilities, providing robust support for edge computing applications.

NXP iMX95 system on module/single board computer High Computing Power to Empower Edge Applications

Rich CPU Interfaces

NXP iMX95 system on module/single board computer Rich CPU Interfaces

ISP Significantly Enhances Image Quality

The ISP technology integrated into the i.MX95xx chip supports various image sensors and is optimized for different application scenarios.
Whether it's for industrial inspection, robot vision or autonomous driving applications, the i.MX95xx can provide clear and accurate image data.

NXP iMX95 system on module/single board computer ISP Significantly Enhances Image Quality

High Definition Decoding and Display Enhancement

The i.MX95xx chip supports H.264 encoding & decoding and H.265 decoding with resolutions up to 4K, easily meeting the demands of playing high-definition videos.
At the same time, the chip also utilizes advanced display enhancement technology,
which can further improve the contrast and color saturation of the picture, giving users a more stunning visual experience.

NXP iMX95 system on module/single board computer High Definition Decoding and Display Enhancement

Safety Features

i.MX 95 series has safety features that comply with the ISO 26262 ASIL-B and IEC 61508 SIL-2 functional safety standards to support basic safety measures
in automobiles and functional safety in industrial control systems.

NXP iMX95 system on module/single board computer Safety Features

Continuously Updated User Profiles

NXP iMX95 system on module/single board computer Continuously Updated User Profiles

Broad Industry Applications

In multiple industries including industrial, medical, power, automotive transportation, environmental monitoring, smart cabins,
and IoT, the FET-MX95xx-C SoM, with its high performance, multifunctionality, and industrial-grade advantages, coupled with Forlinx's competitive pricing
and comprehensive after-sales technical support, will help your products quickly enter the market and stay ahead in the industry.

NXP iMX95 system on module/single board computer Broad Industry Applications

▊ Hardware Features



FET-MX95xx-C System on Module Basic Features

CPU

NXP i.MX9596

Clock:[email protected] + 1x Cortex-M7@800MHz + 1x Cortex-M33@333MHz

NPU: 2TOPS

GPU: Mali-G310; OpenGL ES 3.2, Vulkan 1.2, OpenCL 3.0

VPU:

  • Hard Decoding: H.264, H.265: up to 4K@30fps
  • Hard Encoding: H.264, H.265: up to 4K@30fps


RAM

8GB LPDDR4X

ROM

64GB eMMC

Voltage input DC 12V

Operating temp

-40℃~+85℃

Connection

Board to board connector(4x 80 pins, 0.5mm pitch, Stack Height: 2.0mm)

OS version

Linux

Dimensions

50mm x 68mm


FET-MX95xx-C System on Module Functional Parameters

Peripheral

NUM

Spec.

JTAG

1

4-pin (JTAG) for debug purpose

UART 1

≤8

Up to 5 Mbps

SPI

≤8

Master/ slave optional

XSPI

≤1

2x Serial NOR flash and Serial NAND flash

CAN-FD

≤5

Complies with ISO11898-1, CAN 2.0B

SAI

≤5


SD Card

≤1

SD card 3.0

SDIO

≤1

SDIO3.0

ADC

≤8

1x 12-bit 8-lane 1MS/s ADC

1 Gbps Ethernet

≤2

1.8 V RMII/RGMII, TSN

10 Gbps Ethernet

≤1

XFI, SGMII (2.5 G and 1G), and 10 G-USXGMII (10GE),TSN

USB3.0

1

USB host or USB device

USB2.0

1

USB host or USB device

PCIe

2

PCI Express Gen3

MIPI-DSI

≤1

1x 350 MHz 4-lane MIPI-DSI, up to 2.5 Gbps

Supports 4k@30Hz or 3840 x 1440@60Hz

MIPI CSI-2

≤2

Compatible with MIPI DSI v1.2 and MIPI D-PHY v1.2

LVDS

1

Up to 1080P@60Hz (2x 4-lane or 1x 8-lane)

I2C

≤7

PDM

≤1

8-lane MIC

SPDIF

≤1

PWM

≤6


GPIO

≤111


▊ OK-MX95xx-C Carrier Board

NXP iMX95 development board front


OK-MX95xx-C Single Board Computer Features

Peripheral interfaces

NUM

Spec.

LVDS

1

Dual 8-bit, up to 1080p@60Hz

MIPI DSI

1

4lanes,each lane rating up to 2.5Gbps and resolution up to 4kp30 or 3840 x 1440p60

XFI

1

10G SFP cage

Ethernet

2

10/100/1000Mbps adaptive, RJ45 connector

TYPE-C(DEBUG)

1

UART1/2/3 converted to USB for A53/M33/M7 cores debug purpose

TYPE-C(USB1)

1

USB1, TYPE-C,supports OTG

USB Host

3

Expanded by hub,USB 2.0(up to 480 Mbps)

PCIE3.0

2

PCIE X1 slot, supports both RC and EP

TF

1

SD3.0, 4-bit

MIPI CSI

1

OV13850 is well supported

WiFi&BlueTooth

1

On-board AW-CM358SM,2.4G/5G dual-band Wi-Fi,BT5.0,supports audio features

1x SDIO for WiFi

1x UART for BT

1x I2S for audio

RTC

1

Recommended battery model: CR2032

SPI

1

SPI3,by pin headers

KEY

7

Contains Reset, Sleeping mode, power switch and 4 user-defined keys

Audio

3

Contains 1x 4-stage headphone socket with built-in HP and MIC

1 on-board separate electret MIC

1 dual-channel speaker

CAN

5

CAN FD with isolated circuit, complies with CAN 2.0B up to 5Mbps

RS485

2

Auto transceiving control, with isolated circuit

SARADC

8

1.8V, on-board sliding rheostat

4G

1

Mini PCIe slot, EC20/ EC25 4G networking can be well supported

BUZZER

1

Active buzzer

JTAG

1

For debug purpose

QSPI FLASH

1

XSPI, 4-bit,FLASH

EARC

1

By pin headers, for audio transmitter

TAMPER

1

By pin headers, for tamper detecting

FAN

1

SoM cooling solution

LED

4

User-defined LED

▊ Download


Catalog: Forlinx Catalog Manual

Product Brief: FET-MX95xx-C SoM and OK-MX95xx-C SBC introduction

▊ Accessories


Please click here to get more information about the supported modules and accessories.

▊ Technical Support


1. Files to be provided after buying

Hardware related: datasheet, user guide, carrier board schematic, carrier board PCB, SoM pinmux;

Firmware related: OS image, testing demo, source code, manual;

Compiling environment

2. Fast response after-sale technical support service

Contact Us

Welcome to get in touch with us, our experts will reply to your email within 24 hours.

Reset

▊ How To Buy


1. Order Online

We have an online store on Alibaba, please contact us for details.

2. Order Offline

Please send your inquiry to [email protected];

3. Payment Terms

100% T/T in advance.

▊ Shipment


1. Delivery: Goods will be shipped by express upon the receipt of the payment;

2. Lead time: Goods will be shipped out within five working days for sample orders and 6 weeks for bulk orders;

3. Shipping charge: Buyers should bear the shipping cost.

▊ Other Forlinx Recommendations


OK-MX8MPQ-SMARC Single Board Computer
OK-MX8MPQ-SMARC Single Board Computer
CPU: iMX8M Plus
Architecture: 4*A53+M7
Frequency: 1.6GHZ
RAM: 2GB/4GB LPDDR4
ROM: 16GB / 32GB eMMC
System: Linux 6.1.36
Learn More
OKMX8MP-C Single Board Computer
OKMX8MP-C Single Board Computer
CPU: NXP iMX8M Plus
Architecture: 4*A53+M7
Frequency: 1.6GHZ
RAM: 2GB/4GB LPDDR4
ROM: 16GB eMMC
System: Linux5.4.70+Qt5.15, Android 11
Learn More
FET-MX95xx-C System on Module
FET-MX95xx-C System on Module
CPU: NXP i.MX95xx
Architecture: 6× [email protected] + 1x Cortex-M7@800MHz + 1x Cortex-M33@333MHz
Frequency: 333MHz ,800MHz,1.8GHz
RAM: 8GB LPDDR4x
ROM: 64GB eMMC
System: Linux
Learn More