FCU1103 Embedded Computer Designed based on i.MX6Ul traLite processor
FCU1103 control unit is widely used in many fields such as EV charging pile, communication gateway, data acquisition, human-computer interaction, etc.
FCU1103 Embedded Computer Features:
- Designed based on Freescale i.MX6Ul traLite processor, high performance, ultra low power;
- Open-source code for convenient hardware design and software customization by users.
- CPU with native support for and compliance with the ISO7816 protocol, enabling usage with encryption modules.
- Power fail safeguard allowing the system to continue running for 15 seconds to prevent critical data loss.
- On-board ready-to-use connectors: 4x DI, 4x DO, 2x RS485, 2x CAN, 1x Ethernet (expandable to 2 channels), all designed with isolated protection circuits.
- Status LED indicators for monitoring system operation, network communication, and hardware interface status.
- Multiple communication options: on-board Ethernet (100M), WIFI & BT, 4G or GPRS modules.
- Standard SD card slot compatible with SD, SDHC, and SDXC cards, supporting capacities up to 64GB.
- Standard 3.5mm stereo earphone jack, built-in microphone, and expandable with 1Wx2 speakers or a 3.5mm single-track microphone.
- Support for a 7'' LVDS display.
- OS kernel upgrade capability via SD card.
- Wide voltage range: stable system operation from 9V to 15V to prevent failure due to voltage fluctuations.
- External case designed with aluminum alloy and mounting holes, with dimensions of 147 x 103 x 42mm.
SoM designed based on i.MX6UltraLite Processor
Cost efficient, open source file, low power performance and compact outline
Multiple network communication options
GPRS, WIFI&BT, Ethernet are all optional to users
Abundant data acquisition interfaces for terminal device
2x RS485, 2x CAN, 1x RS232, 4x DI, 4x DO, all are with isolated and
ground protection circuit, make the communication safe and realiable
Audio playing, LVDS display and multi-media for HMI are all available
Standard 3.5mm stereo earphone jack with builtin micphone
users could also mounting with 1W x2 speaker or 3.5mm single track micphone, 7'' LVDS display,
and DVI-I interface
This unit can meet users' all demand for power charging metering.
▊ Hardware Features
| Overview of FETMX6UL-C System on Module | |||
|---|---|---|---|
| CPU | NXP single core i.MX6UL | CAN | 2x CAN |
| Architecture | Cortex-A7 | USB | 2x USB |
| Frequency | 528MHz | SD/MMC/SDIO | 2x SD/ MMC/ SDIO |
| RAM | 512MB LvDDR3(commercial grade) 256MB LvDDR3(industrial grade) | Ethernet | 2x Ethernet, 10/100M auto-negotiation |
| Flash |
8GB eMMC(commercial grade) 256MB/1GB NAND FLASH (industrial grade) |
UART/IrDA | 8x UART/ IrDA |
| Voltage Input | 5V | EINT/GPIO | supported |
| GPU | PXP | Video Coder | software code |
| Dimensions | 50mm*40mm | EBI BUS | supported |
| Package | board to board connector | JTAG | supported |
| OS | Linux 3.14.38 | CAMERA | 1x camera, 5.0MP, parallel |
| LCD | RGB 24-bit | PWM | 8x PWM |
| AUDIO | 3x audio | ADC | 10x ADC |
| I2C | 4x IIC | ISO7816-3 | 2x ISO7816-3 |
| SPI | 4x SPI | Keypad Port | 8*8 |
| QSPI | 1x QSPI | SPDIF | 1x SPDIF |
| Hardware Features | |
|---|---|
| Interface | Spec. |
| CPU | NXP i.MX6UltraLite, ARM Cortex-A7, 528MHz |
| RAM | 512MB LvDDR3(commercial grade), 256MB LvDDR3(industrial grade) |
| FLASH | 8GB eMMC(commercial grade), 256MB NAND FLASH(industrial grade) |
| External Storage | standard SD card slot, can support SD, SDHC, SDXC card, SDXC up to 64G |
| Wireless Network | SIM800A, China Mobile, China Union GPRS, Mini SIM card slot (marked withSIM-GPRS) |
| ESAM |
ISO7816 protocol |
| PSAM | Mini SIM card slot(marked with “SIM') |
| DO |
4x DO, electromagnetic relay isolation. contact rating: 1A 30V DC/0.5A, 125V AC/0.3A, 60V DC. Connector: green terminal bond with pitch of 3.81mm |
| DI |
4x DI, photo coupler isolation, green terminal bond with pitch of 3.81mm, it's configured as direct current voltage input, voltage from 3V to 24V set to be high level and voltage below 1V DC set to be low level, it also could be set as internal isolated 5V power input and external dry contact |
| Display |
Standard DVI-I connector, Topway brand LMT070DICFWD-AKA LCD is supported by default |
|
Power Failure Protection |
CPU is with 1x GPIO for external power supply mode detecting, when external power input voltage is above 8V, IO will be high level, and PG green LED on case is lighting; otherwise IO will be low level and PG green LED will be light off.
When external power input cut off, system will be automatically switch to get power supply from supercapacitors and the PG red LED will be lighting, the supercapactiors could supply power at least 15 seconds and detect whole unit internal 5V main power voltage. When voltage falls more than 10%, the whole device will be cut off to avoid system failure because of overlow voltage |
|
UART (contains RS485) |
UART1: 3-wire debug port, DB9 connector, without isolation, it's marked as Console on case
UART2: for card reader, 3-wire, green terminal bond, without isolation
UART3: for GPRS module, not drawn out
UART4: it's converted in device to RS485-1, drawn out by green terminal bond, with electrical isolation
UART5: it's converted in device to RS485-2, drawn out by green terminal bond, with electronical isolation |
| USB |
1x USB 2.0 OTG, standard Micro USB connector
1x USB 2.0 Host, standard USB A connector |
| CAN BUS |
CAN1: CAN2.0 B, 1Mbps, with electronical isolation, it's used for communication with power charging controller
CAN2: CAN2.0 B, 1Mbps, with electronical isolation, for backup |
| Ethernet |
Net1: standard RJ45 connector, 10M/100M adaptive, for connecting with supra system
Net2: standard RJ45 connector, 10M/100M adaptive, backup interface |
| WiFi& BT |
RL-UM02WBS-8723BU-V1.2 module, IEEE 802.11b/g/n 1T1R WLAN and Bluetooth 2.1/3.0/4.0 |
| RTC |
RX8010SJ chip, on-board RS232 battery, it could continue working for a year |
| Audio |
standard 3.5mm stereo earphone jack, built in single track micphone, users could also expand 1W x 2 speaker connctors or 3.5mm single track micphone jack (pad is preserved on PCB but without mounting hole on enclosure |
|
Power Consumption |
Rated voltage: 12V, work normally between 9V to 15V, it's designed with reverse polarity protection
power consumption is below 5W if works with a Topway display LMT070DICFWD-AKA |
| Dimensions | 147mm×103mm×42mm |
| Mounting |
4 screws Φ4mm |
| Software Features | ||||
|---|---|---|---|---|
| U-boot | u-boot-2015-04 | Kernel | Linux-3.14 | |
| Driver source | ||||
| NIC | LCD backlight | CAN | SD card | |
| ESAM | U-disk | ext3 file system | USB touch screen | |
| RTC | watchdog | GPIO | 4G | |
| UART | RS485 | GPRS | ||
▊ Accessories
Please click here to get more information about the supported modules and accessories.
▊ Technical Support
1. Files to be provided after buying
Hardware related: datasheet, user guide, carrier board schematic, carrier board PCB, SoM pinmux;
Firmware related: OS image, testing demo, source code, manual;
Compiling environment
2. Fast response after-sale technical support service
Contact Us
Welcome to get in touch with us, our experts will reply to your email within 24 hours.
▊ How To Buy
1. Order Online
We have an online store on Alibaba, please contact us for details.
2. Order Offline
Please send your inquiry to [email protected];
3. Payment Terms
100% T/T in advance.
▊ Shipment
1. Delivery: Goods will be shipped by express upon the receipt of the payment;
2. Lead time: Goods will be shipped out within five working days for sample orders and 6 weeks for bulk orders;
3. Shipping charge: Buyers should bear the shipping cost.
▊ Other Forlinx NXP i.MX6UL Series Products
|
|
|
| OKMX6UL-C1 Single Board Computer(SBC) | OKMX6UL-C2 Single Board Computer(SBC) |
