FET-MX9352-C System on Module based on NXP i.MX 93 family i.MX9352 SoC
FET-MX9352-C System on Module(SoM) is the world's first system on module/computer on module designed by Forlinx as an alpha partner based on NXP i.MX 93 family i.MX9352 SoC. It contains two Cortex-A55 cores and one Cortex-M33 core, speed up to 1.7GHz. 8x UART, 2x Ethernet(contains 1 TSN), 2x USB2.0, 2x CAN-FD and other common interfaces.It's more advanced than i.MX6 and i.MX8 family, integrating NPU engine for deep learning accelerating. It has a compact appearance can fit various applications.
Forlinx iMX93 SoM Highlights:
- A core + M core, multi-task processing with real-time control;
- 0.5 TOPS Ethos U-65 microNPU for light Al applications;
- Dual Gigabit Ethernet with one enabled with TSN;
- One dual-lane MIPI-CSI;
- Various interfaces ready-to-use, excellent integrity of signal and power;
- Advanced performance and cost efficient
FET-MX9352-C SoM
Cortex-A55+ Cortex-M33 for Multi Tasks Processing with Low Latency
i.MX9352 is a hybrid processor contains two Cortex-A55@ 1.7GHz cores for multi tasks processing and one Cortex-M33 real-time core;
It integrates upper computer and slave computer in one, but with simplified and compact appearance, which will be beneficial for cost cutting down.
Communication between A core and M core based on built in high speed bus, is more efficient and reliable.
TSN and CAN-FD: Meeting Digitizing Demands for Industries and Automotive
FET-MX9352-C supports two Gigabit Ethernet ports with one enabled with TSN, in addition to ensuring clock accuracy,
it will promote communication between IT and OT, helping to build network with low latency.
0.5 TOPS NPU: Empowering Low Cost and Light AI Applications
i.MX9352 processor contains an innovative ARM Ethos U-65 microNPU, each cycle with 256 MAC,
0.5 TOPS can meet the demand for high efficient, fast and safe machine learning at edge side.
Industrial Grade Materials: Fit for Harsh Environments
All materials including capacitor, resistor and connector on FET-MX9352-C system on module are industrial grade, can support the SoM to work in -40℃~+85℃ operating environment very well.
Various Peripheral Interfaces with High Scalability
Long-Term Availability
i.MX 93 family processors was launched in 2023 and is scheduled with long-term supply, the availability will be at least 15 years.
▊ i.MX 9352 SoM & SBC Video
i.MX 93 Demo | FET-MX9352-C SoM & OK-MX9352-S SBC
▊ Hardware Features
|
FET-MX9352-C SoM Features |
|
|---|---|
|
Processor |
NXP i.MX93 i.MX9352 CPU: 2× [email protected] + 1× Cortex-M33@250MHz NPU: 0.5 TOPS |
|
RAM |
1GB LPDDR4 |
|
ROM |
8GB eMMC |
| Power input | DC 5V |
|
Operating temperature width |
-40℃ ~ 85℃ |
|
Packaging |
board to board connector(2x 100-pin connector with pitch of 0.4mm, combined height 1.5mm) |
|
Dimensions |
33 x 48mm |
|
OS version |
Linux5.15.52+Qt6.3.2 Linux6.1.36+Qt6.5.0 |
|
Specifications |
||
|---|---|---|
|
Interface |
QTY |
Spec. |
|
LVDS |
1 |
single 4-lane supports 720p60, and can support up to 1366x768p60 or 1280x800p60 |
|
RGB parallel |
1 |
RGB888, up to 1366x768p60 or 1280x800p60 |
|
MIPI DSI |
1 |
1x 4-lane MIPI-DSI, pixel from LCDIF; compatible with both MIPI DSI v1.2 and MIPI D-PHY v1.2; up to 200MHz pixel clock, pixel filling rate 140 Mpixel/s, 24-bit RGB; supports resolution 1080p60 or 1920x1200p60, each lane with data rating up to 1.5Gbps |
|
Ethernet |
≤2 |
supports 2x RGMII, one supported with TSN; the one with TSN Ethernet QoS supports 802.1Qbv and 802.1Qbu and time based scheduling; 10/ 100 / 1000Mbps, complies with IEEE 802.3 |
| UART |
≤8 |
up to 5Mbps |
| CAN-FD | ≤2 | complies with CAN-FD and CAN 2.0B |
| USB |
≤2 |
two USB2.0 controllers with PHY integrated |
| SD | ≤2 |
uSDHC2: 4-bit, compatible with SD 3.0 and 200MHz SDR, up to 100MB/s uSDHC3: 4-bit SDIO |
| SDIO |
≤1 |
SDIO3.0 |
| SAI |
≤3 |
SAI1 supports 2 lanes, SAI2 supports 4 lanes, and SAI3 supports 1 lane; supports full-duplex serial, such as I2S, AC97, TDM and codec/ DSP |
| SPDIF | 1 |
supports raw capture mode supports L-PCM and IEC61937; |
| PDM | 1 | 24-bit, supports liner phase response and AOP MIC |
|
MIPI CSI |
1 |
compatible with MIPI CSI-2 v1.3 and MIPI D-PHY v1.2; supports up to 2 RX data lanes (and 1 RX clock lane); pixel clock up to 200MHz, up to 150Mpixel/s pixel filling rate under rated voltage and super speed voltage |
|
SPI |
≤8 |
master/ slave mode can be set |
|
I2C |
≤8 |
up to 100Kbit/s under standard mode, 400Kbit/s under fast speed mode, 1000Kbit/s under enhanced fast speed mode, 3400Kbit/s under high speed mode, and 5000Kbit/s under super fast speed mode; slave mode is available for high speed mode and super fast speed mode |
|
I3C |
≤2 |
supports 400Kbit/s fast speed mode and 1000Kbit/s enhanced fast speed mode, it's backwards compatible with I2C; clock up to 12.5M, supports HDR-DDR mode |
|
ADC |
≤4 |
1x 12-bit 4-lane 1MS/s ADC |
|
JTAG |
1 |
to debug Cortex-M33 |
▊ i.MX93 Development Board
OK-MX9352-C Development Board
To minimize your development workload, we can provide starter kits that can be used as complete development platforms for evaluation and application development.
OK-MX9352-C development board consists of carrier board and SoM, and SoM could be connected to carrier board via 2x 100-pin connectors, which will be much convenient for plug/ unplug operations with high reliability.
OK-MX9352-C Evk has multiple peripheral interfaces, such as Ethernet, UART, CAN-FD, RS485, etc. Besides, the 4G module and WiFi are well supported even in harsh environments, which could be a reliable reference for users, and finally help users to fasten their product time to market.
▊ Downloads
Catalog:
Forlinx Catalog Manual
Datasheet:
FET-MX9352-C SoM and OK-MX9352-C introduction
|
Linux |
User manual, compiling guideline, kernel source code, file system, OS image, VM ubuntu image, SD card tool, USB OTG tool, QT demos and source code |
| Hardware | User manual, carrier board schematic, carrier board PCB(AD), datasheet, carrier board and SoM DXF files, pinmux sheet |
▊ Accessories
Please click here to get more information about the supported modules and accessories.
▊ Technical Support
1. Files to be provided after buying
Hardware related: datasheet, user guide, carrier board schematic, carrier board PCB, SoM pinmux;
Firmware related: OS image, testing demo, source code, manual;
Compiling environment
2. Fast response after-sale technical support service
Contact Us
Welcome to get in touch with us, our experts will reply to your email within 24 hours.
▊ How To Buy
1. Order Online
We have an online store on Alibaba, please contact us for details.
2. Order Offline
Please send your inquiry to [email protected];
3. Payment Terms
100% T/T in advance.
▊ Shipment
1. Delivery: Goods will be shipped by express upon the receipt of the payment;
2. Lead time: Goods will be shipped out within five working days for sample orders and 6 weeks for bulk orders;
3. Shipping charge: Buyers should bear the shipping cost.
▊ Related News
- How to Configure NXP i.MX9352's GPIO?
- FORLINX Embedded Launches SOM based on NXP i.MX 9352
- World Debut! FET-MX9352-C System on Modules was Launched
▊ Other Forlinx Hot Products
Architecture: Cortex-A55
Frequency: 1.4GHz
RAM: 1GB LPDDR4
ROM: 8GB eMMC
System: Linux
Architecture: Cortex-A53
Frequency: 1.4GHz
RAM: 1GB/2GB DDR4-1600(regular with 1GB)
ROM: 8GB eMMC
System: Linux 5.15.52+Qt 6.3.2
Architecture: 2*A55+M33
Frequency: 1.5GHz
RAM: 1GB LPDDR4
ROM: 8GB eMMC
System: Linux 5.15.52+Qt 6.3.2
