Forlinx i.MX6 Quad core board cooling solution reference
When choosing a heat sink, you must first consider the needs of the platform, without excessive pursuit of efficiency; secondly, from the perspective of installation, the heat sink and the core board must be simple and firm; finally, considering the economy, the heat sink is only an auxiliary tool after all, and there is no need to choose the cost Too high.
Two specifications of heat sinks are recommended for the Forlinx embedded FETMX6Q-C core board.
The following is a comparison of the data before and after installing the heat sink.
Before installation:
Enter the CPU temperature self-check command, and the display is 51 degrees Celsius
root@sabresd_6dq:/ # cat /sys/class/thermal/thermal_zone0/temp
51
After installation
Enter the CPU temperature self-check command, and the display is 45 degrees Celsius
root@sabresd_6dq:/ # cat /sys/class/thermal/thermal_zone0/temp
45
After experiment, the cooling effect is about 6 degrees Celsius, which is quite impressive.
This heat sink can also be used for OK4418-C development boards and OK4418 development boards for Forlinx Embedded Samsung S5P6818 and S5P6818 series products.